I received my AC Delco cam adjustment bolts for my Expedition upper control arms today.
They came with cam washers with a square opening for allowing 3/8" ratchet insertion for adjustment.
Also came with smaller diameter washers (2 per bolt)
I am assuming these smaller washers go to the inside of the cam washers act as a shim to allow room for the ratchet to install into the square opening for adjustment.
Can anyone confirm the proper placement for these smaller washers?
Towards the inside of the larger cam washer between the frame mount and the cam washer like this?
Or towards the outside of the larger cam washers between the cam washer and the bolt head and nut like this?
They came with cam washers with a square opening for allowing 3/8" ratchet insertion for adjustment.
Also came with smaller diameter washers (2 per bolt)
I am assuming these smaller washers go to the inside of the cam washers act as a shim to allow room for the ratchet to install into the square opening for adjustment.
Can anyone confirm the proper placement for these smaller washers?
Towards the inside of the larger cam washer between the frame mount and the cam washer like this?
Or towards the outside of the larger cam washers between the cam washer and the bolt head and nut like this?