Originally Posted By: dnewton3
Well then you're in a very small fraction of BITOGer who actually THINK your way through the issue, rather than just feel it so ...
I applaud your rational approach. You are correct, it is very hard to get a fiscal payout with BP for small sump applications, especially when you can go 25k miles on "normal" filtration, and still have such incredibly low wear. It's not that it cannot be achieved, but the ROI is WAY FAR out there. And if you cannot make it to that break point, then it's an exercise in futility.
Yea thanks. I do try to think things through, but often times I end up over thinking things, or thinking I have a better way of doing something and having it bite me in the [censored]. Then I see why everyone else does it the other way....
Originally Posted By: Shannow
Originally Posted By: 4x4le
I have a blackstone kit from a while ago that i never sent in. My dealer gives me free prepaid schaffers kits so I have been using them but I will send in a blackstone in a few thousand. I thought my oil might be thinning based on the last sample so I added a pint of moly ep which made up 1/2 qt of the oil added between the last 2 samples. It does not seem to have any more moly in it than the oil normally would. I doubt I will be using it anymore as it seems to just thicken. Wonder if I can find a VOA on that....
There's a couple around, and they all show nearly no moly...
http://www.bobistheoilguy.com/forums/ubb...amp;type=thread
Was one of them, in which Molakule offers some insight into the product.
yea I should have came back and mentioned I ended up finding a voa of it. I do really doubt I will be using it anymore unless I find my oil going to the thin side.