2023 FLTRK Amsoil MCV 20W-50 6030 miles

Joined
May 23, 2017
Messages
47
Location
Illinois
Pretty happy with the way things are looking.

Capture.webp
 
Last edited by a moderator:
I see you have 3 samples listed on this report. Sample #2 (18-Jun-24) lists unit time as 26,703 and sample #3’s (17-Aug-24) unit time is 37,892 for a difference of 11,189. The lube time for sample #3 shows 6,030. Did you do an oil change in between?

Since your bike has an M8 motor, are you using either a Harley P/N 62700296 (black) or 62700297(chrome) oil filter?

Most spin on oil filters have some ability to capture some particles down to 5 microns. Since Harley doesn’t list their oil filter efficiency per ISO 4548-12, there is no way of knowing how well they filter. It definitely is not all 5 micron or larger particles.

Also I don’t know why they flag the magnesium at 23-29ppm as high. A lot UOA’s that I see have magnesium anywhere from say 500-800 ppm. The ones that I see that are low like yours is because the calcium is higher.
 
I see you have 3 samples listed on this report. Sample #2 (18-Jun-24) lists unit time as 26,703 and sample #3’s (17-Aug-24) unit time is 37,892 for a difference of 11,189. The lube time for sample #3 shows 6,030. Did you do an oil change in between?

Since your bike has an M8 motor, are you using either a Harley P/N 62700296 (black) or 62700297(chrome) oil filter?

Most spin on oil filters have some ability to capture some particles down to 5 microns. Since Harley doesn’t list their oil filter efficiency per ISO 4548-12, there is no way of knowing how well they filter. It definitely is not all 5 micron or larger particles.

Also I don’t know why they flag the magnesium at 23-29ppm as high. A lot UOA’s that I see have magnesium anywhere from say 500-800 ppm. The ones that I see that are low like yours is because the calcium is higher.
Yes, there is an oil change in between the last 2 samples.
The chrome one.
I think they flag it based on the numbers given to them from Amsoil?? I had to call Amsoil a while back and ask them why something was getting flagged and Amsoil had them change it at OAI.
 
Yes I had the engine built, full track build from the crank to the top including porting, Carrillo rods and pistons, cams, upped compression and so it. It saw many years of track use so it was due
 
Back
Top Bottom