2021 Ford F-150 factory filter partial cut and post

[53' Stude]

Good Evening folks. Other day a friend of mine brought his new 2021 F-150 with the 3.5 engine over for oil change. He did it himself. Put some M1 5w30 and a FRAM ULTRA from my stash in and on. He did have to use my claw wrench to loosen the filter. I had no issue cutting the filter open; took all of 30 seconds but I couldn’t get the whole media etc out cause of the crimp, damage do some end. I noticed though, soon as I cut filter open, the one end cap fell right out in drain pan. Poor quality I say. Definitely Purolator filth also. Sorry I couldn’t do better but please enjoy the photos. Hopefully I’ll run across another Ford factory soon or if someone has one send it to me or PM me. Thank You all

 

[MParr]

Yeah, a FRAM ULTRA or a NG 7502

 

[53' Stude]

Yeah, I didn’t recall or get to see you he ULTRA # he put on

 

[volk06]

Yeah, I didn’t recall or get to see you he ULTRA # he put on

I would assume the XG10575. That’s what I run on my 3.5.

 

[wemay]

You do fine work Adam

 

[53' Stude]

You do fine work Adam

I try sir

 

[DuckRyder]

Thanks for the C&P Adam.

 

[53' Stude]

Thanks for the C&P Adam.

You’re welcome Robert

 

[slacktide_bitog]

Thank you for the cut and post

 

[Dave Hess]

I try sir

Any photos of paper media ?

 

[53' Stude]

Any photos of paper media ?

I was going to take pics but most the paper media I got out was shredded.