2016 Ram 1500 have fuel rail Schraeder?

[D60]

Been searching the web for too long and can't get a straightforward answer: did Ram maintain a fuel rail test valve for the 2016 MY on the 5.7?

It appears 2011 and 2012 likely did, but sometimes these things are deleted as running changes to save $

Also, I can find that there is a fuel pressure sensor, so can I ALSO view this as a PID?

 

[Johnny248]

I don't believe that they do. My '11 Doesn't either.

 

[zzyzzx]

Probably not. Sometimes it can be easily added on by removing a fuel related banjo bolt and replacing said bolt with one that has a Schrader valve. I've done it on a Toyota, and when I was searching for the parts, I found numerous ones for Dodge applications.

 

[Johnny248]

Pretty sure the answer is 'No'

Here is the actual part along with the Chrysler lookup

https://www.ebay.com/itm/135070198738

 

[D60]

Pretty sure the answer is 'No'

Here is the actual part along with the Chrysler lookup

https://www.ebay.com/itm/135070198738

View attachment 249737

In that case I hope there's a PID! Thank you for digging up an image.

 

[clinebarger]

There is a fuel pressure PID & sensor, Had to adapt a fuel pressure gauge to late Rams more than once to prove out faulty pressure sensors.

 

[D60]

There is a fuel pressure PID & sensor, Had to adapt a fuel pressure gauge to late Rams more than once to prove out faulty pressure sensors.

Yeah apparently the sensors are not incredibly reliable. Plenty of talk of P0018C/D

Do you recall how you were adapting?

 

[Nukeman7]

The easiest way to adapt a fuel pressure test gauge to that rail setup is to tie into the quick disconnect port. You will need the proper size (e.g., 1/4", 5/16" or 3/8") T-adapter like the ones provided in the kit below.

 

[zzyzzx]

Pretty sure the answer is 'No'

I'm pretty sure that this method is applicable on a lot of vehicles:
https://www.toyotanation.com/threads/diy-5s-fe-fuel-schrader-valve-retrofit.1440234/

 

[D60]

I'm pretty sure that this method is applicable on a lot of vehicles:
https://www.toyotanation.com/threads/diy-5s-fe-fuel-schrader-valve-retrofit.1440234/

I've done it on '00 Taco 3.4.

 

[D60]

I'm pretty sure that this method is applicable on a lot of vehicles:
https://www.toyotanation.com/threads/diy-5s-fe-fuel-schrader-valve-retrofit.1440234/

Found this in my fuel pressure test kit. I should get a straight one, too

I wound up not needing it, will start a separate thread on that.....