20-50 Quicksilver in Harley

Status
Not open for further replies.
Joined
Dec 30, 2005
Messages
5
Location
Port St. Lucie, FL.
I am curious has anyone done an oil test on Quicksilver 20-50 sold at Walmart. I have been using it in my 2014 Harley Limited. The bike runs run's smooth with no unusual noise. Apparently it meet's the standard for Harley oil.
 
It's a Mercury Marine product. I'm gonna go out on a short limb and say it's probably good stuff. Having said that you're likely gonna get a barrage of "it's stupid to use anything other than Shell Rotella 15w40 cause I use it in my highly modified Harley that produces over 100hp". As if that's a lot.
 
Harley, Mystic, Quicksilver oils are CITGO, take your guess at which one has the best add pack. I would guess all 3 are good for the V-Twin.
 
Last edited:
Originally Posted By: Larrymcc
I am curious has anyone done an oil test on Quicksilver 20-50 sold at Walmart. I have been using it in my 2014 Harley Limited. The bike runs run's smooth with no unusual noise. Apparently it meet's the standard for Harley oil.


Please be the first to run a used oil analysis on this oil in a Harley!
There is a used oil analysis or VOA someplace on this forum or it could have been a bike forum that I saw posted. Been curious about this oil since it hit the market, gosh, 2 years ago now?
What I remember is the VOA or used oil analysis, was just that, nothing bad, nothing one would consider outstanding, but then again, what difference, you really need a used oil analysis.

I have always used Quicksilver products oil, lubes etc in my Mercury Marine engines and have been forever curious about the motorcycle oil product now.
HD only recommends a CH4+ or later oil in their bikes, only company that I know that makes that is Mystik and Amsoil.
I have a 14 Road King and using a Mystik 15/50 CJ4 oil right now. With that said, for you I wouldnt be concerned as many use motorcycle oils in their Harleys of course and none carry the CH4 rating. So dont sweat it. *L*

Anyway. thanks for the post. Im glad you didnt notice any additional clatter from the top end, as many do with synthetics which to me is a good sign.
If I find that used oil analysis or VOA someplace Ill post back ... but does not really matter unless you get one done for your engine. I hope the other post someone posted is correct, I personally have not seen that Citgo makes it, it would make me warm and fuzzy if they did.
 
Last edited:
Originally Posted By: Shannow
https://bobistheoilguy.com/forums/ubbthreads.php/topics/3677085/Quicksilver_20w-50_Synthetic_V


Yup! That was the one!

I just compared the Syn Quicksilver with the Semi Syn Mystik, (keep in mind 2 different labs)
The numbers are pretty close, except the Mystic has way more Mag (maybe why the cj4 rating?) might be right its Citgo I see the VOA I did was done around the same time.
Mystik 15/50 VOA
I did notice the viscosity was a little bit on the lighter side of 50 with the Quicksilver at the time, it bothered me at first as HD oil is in the 19+ range. Mystik (according to Blackstone) is not that much more heavy. Anyway, Im over it, splitting hairs and who is to say what is better when it comes to wear with most oils going to lighter rather then more heavy.
Bottom line, they are 50 weight oils.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom