1st Gen TSX Fog Light replacement

[JeffKeryk]

Bumper removal is a snap; hardest part is the b---- clips; they are old and hardened. You need someone to hold the bumper while disconnecting the electrical connectors. The aftermarket light assemblies ($90 Amazon) fittment is not perfect but fine for this old girl. I love this car; it is perfect. Only about 220K. M1 services every 4.5K miles. I never check the oil on the mighty K24!
Busted lens; the left side is cracked.

 

[Sequoiasoon]

Did you check the beam pattern before installing (or after)? I bought a set of aftermarket fogs for Father-in-laws Renegade. I don't recall if Amazon or Ebay. The only things good on them was the bulbs worked and mount was basically the same. The reflectors were loose, the adjustment screws did not even touch the reflector assembly, the beam pattern was non existent.

Get some Lamin-X, Headlight Armor, Weathertech or just bulk film to cover them and save from future rocks. Read my posts and links on DriveAccord. Headlight protection film

Jeep aftermarket that actually had good reviews.

 

[JeffKeryk]

A long phillips can adjust them from the bottom. We'll see. If it is a problem I'll bash 'em out with a hammer. Thanks @Sequoiasoon