I stumbled onto a very low mileage (100K) 1991 Accord at my local pull-a-part. I took the power steering pump, however it had a small seep at the front cover during warm-up. I decided to take a shot at re-sealing it. The kit was only $15 at Auto zone. This is a very easy job, just use an impact to remove the reverse threaded pulley nut. There are not very many moving parts inside. The main shaft seal pops out with a 19mm socket. The other seals are just big o-rings. I wish that I would have learned how to do this 20 years ago!
