break in
-
What mineral oil should i use during break-in process?
Car: Hyundai Tucson 2025 2.0 Turbo Diesel (with PDF) - per manual i should use ACEA C2/C3/C5 oil - I plan to change the oil at 50 miles / 250 miles / 500 miles / 1000 miles / 3000 miles / every 3000 miles thereafter. - I plan to use Amsoil 5w-40 European Synthetic oil at 3000 miles+ - I plan...- joms
- Thread
- break in
- Replies: 17
- Forum: Heavy Duty Engine Oil (HDEO) - Diesel Vehicles
-
T
Oils and Warranty
Trying to get some oils ordered for break in of a new 2024 RAV4 as well regular oil for a 2020 Ford Edge SEL. The ford is out of warranty and I'll probably go HPL 5W-30. I'm actually at work during some down time, on an oil well, and have terrible internet service so googling is being a PITA...- tebtengri
- Thread
- amsoil break in hpl ilsac new car redline warranty
- Replies: 71
- Forum: Passenger Car Motor Oil (PCMO) - Gasoline Vehicles
-
What oil to use in 2005 6spd corvette
Hello, I am currently breaking in my engine. For the first start I used Driven BR30 break in oil. At first oil pressure was okay, a little lower than what I would consider normal however as the motor got to operating temperature the pressure dropped significantly, at idle it got to 7psi and I...- Sweebation
- Thread
- break in dino oil and filter selection oil change
- Replies: 17
- Forum: Passenger Car Motor Oil (PCMO) - Gasoline Vehicles
-
Break in oil for 2005 LS2
Hello, I recently rebuilt my 2005 corvette’s LS2. I’m about ready to start it but I want to be 100% certain what I’m giving my car will be the best for it. I have already put 6 quarts of Joe Gibbs (Driven) 5w-30 break in oil and after the initial start and vacuum pulls I was planning to put in 6...- Sweebation
- Thread
- break in dino oil comparison zddp zinc
- Replies: 15
- Forum: Passenger Car Motor Oil (PCMO) - Gasoline Vehicles