Search results

Last Saturday I took off the valve cover on the 2004 2.3L Focus engine as it was getting dirty. Changed the oil while at it. Turns out the two inside fasteners were barely finger tight. In the end not bad for 205,000 miles. Tomorrow a leak in the 2004 LeSabre lower hose connection to the AC...

Yes, the stock 4.054 bore along with the 428 crank. Although now a 4.084 bore.

Mercury 410

That was last week when I thought I had cut off the tip of my third finger on my left hand or crushed it severely. I went to turn the crankshaft in my engine and had my hand on the block as a crank counter weight came by. I was on the ground in an instant, rolling around for minutes on end...

Finally got the thrust bearing sanded down to provide me with some movement in the block. Initially had no movement and the crank was locked in. Should be somewhere between 0.006-0.008" now. Range for FE is 0.004-0.010" desired. After that mounted the pistons to the rods.

The speedometer has been jumpy in the 626 for quite awhile. However, two days ago it was not only jumpy but howling. Ok, time to bite the bullet and change it out. I've had two in stock for a long time but that new noise if too much. Don't forget the hidden screw holding the dash fascia on...

Got the crank into the 410 after checking clearances. Now I await to pick up my rods/pistons after the machinist mounts them. After that primed parts I am having sand blasted every week.

Drums for the Ambassador station wagon for a rear brake job.

Just installed after arriving two days ago. Don't even ask what the two aluminum rings cost. Originals were just plastic with no NOS available and survivors mostly all cracked. The pocket in the back is NOS that I got when I traded a 66 battery support tray which was different from the 65. So I...

Never...

Excellent purchase. My 2004 2.3 manual is at 203,000 miles and not one problem ever.

Easy, my 2004 Buick LeSabre which is used specifically just for that.

Never live anywhere else. Walking the beaches of the Pacific Ocean or among the Redwoods and Sequoias is unmatched by anything else.

Arrived today my my most favored eBay seller. Have bought hundreds of parts from him at good prices. Two Mazda 626 inner tie rods at $28 ea. Spare starter solenoid for my 72 AMC at $20. Strut bushings for the 73 Polara at $20 and Motorcraft water temperature sensor for 98 Sable wagon at $14. All...

I'll have to disagree with this as California is one of the few in that the plate stays with the car. I have bought five classics since 1985 and all kept the same plate when first registered in California. Three, a 68 (1 owner), a 72 ( 1 owner), and 73 (two owners) were recently changed to...

LOL, I'm 71 and take complete care of 11 cars and don't see myself slowing down or stopping.

After changing my struts I noticed the stabilizer link seal were ripped. So yesterday had the time to do them and the rear shocks. So first I need a space and that means moving the covered F-100 out of the driveway for the Focus parked behind. It is early so why not take a 40 mile RT in the...

Ford power steering hose for a 1998 Sable wagon. Ford 3.0L Vulcan NOS block to replace current engine with rod knock which will make installing hose easy.

Years ago, 2010, I helped on an inspection of the USS Iowa at the Suisun Reserve Fleet before she was removed. Her machine shop was roomy for a BB. USS Hornet, where I have worked in the machine shop, isn't bad either just not as much space between machines. However, the take all winner was the...

Needed to resupply filters for the Focus and Mazda 3. Like to have lots in stock to minimize how often to order.