Originally Posted By: benjamming
What lab did the analysis? TAN result? Do you have any way of knowing the age of the fluid that was used for this fill?
Fluid age was 25 months, about 30,000 miles. No TAN test done but can be requested.
Last service was the dealer's "drain & flush" but don't know if it was full capacity.
Thanks for the other advice. I was considering Amsoil synth ATF and do a few drain and fills for the first while to get out the old residue. Any comments on this DIY job vs. a full capacity change out at a...
Thanks Critic for the replies. Yes, it was a very light brown, not heavy. I did a white card blotter and there is minor staining. Already checked into the belt, w/p and plugs. They need replacement and budgeted for that already.
The last change was about 30,000 miles ago. I don't own it but checking it out.
I agree, 127k on the original is amazing. I noticed no tow hitch on it. It looks like the owners generally stuck with dealership service recommendations.
I'm not a transmission fluid analysis expert. These are for an Odyssey, well known for flaky transmissions. About 30,000 miles service on Honda ATF. Obviously it is due for a change, but any comments on the wear metals?
METALS (D5185): Milligrams per Kilogram (PPM)
Tin 1
Lead 1
Copper 8...
Found this on the web for Toyota
Model Year Engine Belt/Chain/Gear
4Runner 1990-2000 4 Cylinder Chain
1990-2002 V6 Belt
2003-2007 V6 Chain
2003-2007 V8 Belt
Avalon 1995-2003 V6 Belt
2004-2007 V6 Chain
Camry 1990-2001 All Belt
2002-2008 4 Cylinder Chain
1990-2006 V6 Belt
2007-2008 V6...
That precisely is the problem. These are engines other people owned and they did not always do so. Some have signs of light varnish under the valve covers, others show traces of sludging/varnish.
I have found posting about Auto-Rx as the slow and easy approach for cleaning up the lube channels...
I am looking for input on which of these manufacturers' engines have timing belts, if at all, (prefer classification by year) and when they should be replaced.
Nissan Pathfinder
Jeep Cherokee
Jeep Grand Cherokee
Dodge Durango
Toyota 4runner
Honda CR-V
Honda Accord
Toyota Camry
I want to hear your experiences with internal engine cleaners like those for the intake, valves, rings, etc. Any recommendations? I have some old engines with 120,000 miles and up, and want to give them a good cleaning out.
Focus on fluids and parts that fatigue from fluids!
Change coolant more often than recommended and don't believe long-life lasts 5 years or +100k. Every 3 years best. Check hoses and thermostat at same time.
Good quality oil and filter always with a UOA once a year minimum to look for...
Here are conclusions from a research paper I got from 1995:
1. Lube temp on the bearing surface varies in proportion with feed oil temp (test engine showed rod bearing temp was 5 to 10C higher than oil temperature)
2. Temperature difference between bearing surface and feed oil is almost...
No lab comments other than stated earlier. I do not know what brand oil the factory uses (maybe a 20 wt?) but the dealer uses a 5W30 with a kV of 10.7 cst at 100C. Next UOA will confirm fuel dilution. I wonder if this was caused at first start and tuning of the system since it could have been...