Search results

Sounds like they want the tank empty, where at in the kc area?

ICON @ harbor freight

That has to be a staged photo, I can't imagine any one doing that.

When a case is started with walmart they will contact you and discuss the issue. I took my Ford Ranger there to have tires balanced, and the tech put gouges in aluminum wheels with a impact and they replaced them no questions or hassles. As long as the manager of the service center has...

12 years in F150 and still starting fine

If you do you need to use a product like redline water wetter, as a corrosion inhibitor. Your boiling point will improve with the water wetter and straight water, it is done with street rods all the time in warm weather, that are have overheating problems.

I have a 1985 Toyota 4x4 with 2.4 the head gasket blew and when I tore it down one exhaust lobe was worn exactly like those are. It popped back through exhaust when shifting. I put new head that I got off ebay for 320.00 and new rocker assembly that was 175.00 From that point forward I have...

I am also a fuel transport driver, if the station has blender pumps it is done at store. If they don't you have to load mid grade at the rack

Thanks all, it is still CJ. Looks like pretty good numbers. Putting in my street rod and 1985 Toyota Pickup

Does any one know the zinc level?

It should be same as the coolant temp

I bought a 2011 Edge new and changed the oil first time at 2500.I have used 5w20 Supertech synthetic since the first change.It has the 3.5 and does well with it.

A nylon tie wrap works very good for this,have used them many times

I would consider quaker state Defy 10/30 , i use it in my street rod w/ 350 chevy it has increased level zinc

1915 Ford Model T had to crank it to start it.

Check the brake calipers to make sure they are not keeping the brake pads in contact with rotors even when the brake pedal is not depressed,my 2000 F150 had this problem and that is what was causing it.

The coffee can on the fender is a vacumm resevoir,10w30 should be fine in this with a motorcraft FL-1 filter.

Yes it will,but a better solution is to use epoxy primer which has excellent adhesion to bare metal and will provide a greatbase for body filler,it will also provide great protection against rust,when the epoxy primer is dry scuff with 80 grit and apply filler it willbe water proof from the...

They are having some issues with the new tranny,biggest one being when car is cold and you put in drive it will not move.

I have a 2008 2 door base model, just a bare bones car but i love it,it gets 35-36 mpg and is really a nice driving car.