Search results

The AWD message wasn't. I just drove it on ramps. CEL was. Amazon has quite a few right now under $35 black Friday prices, I will get one if those for Saturday delivery, clear the codes, and hope they stay off (CEL should, at least).

Cheaper the better, I wouldn't use it often. It drives fine except for the dash lights/messages and I made an appt for next week at the dealership since it is still under warranty but would prefer to just clear the codes on my own (I think the CEL is not a problem and hope the same for the AWD...

Was just trying to multi task. Not something I normally do, and only clean NAF and throttle body every 25 to 30k miles. I don't have a scan tool to clear the codes, thus disconnecting the battery. Is there a good basic one you recommend?

2019 Highlander. I changed the oil today, cleaned engine and cabin air filters (both washable), cleaned mass airflow sensor and throttle body. Now I get both check engine light and service AWD message. I think the AWD message first appeared when driving up on the ramps and they slid, but not...

Good alignment article. I am going to just leave it how it is for now after reading this. https://www.tirerack.com/tires/tiretech/techpage.jsp?techid=4

Seems fine.

Was there 6 years for two degrees. But have not been living there for 15 years. Miss that town. I agree with your assessments of TP and BFF.

This one was supposedly really good, lol.

The second two were similar. First one was way different.

What version of AT3 do you have (there are three with different levels of aggressive tread). The 4S are least aggressive. I just put them on the Ram and really like them so far. The Continental Terrain Contact on a prior vehicle were good, too.

That much play with the caster? Everything looks good except right caster. The pic I attached has before and after alignment specs. This shop is supposedly really good for alignments but IMO it 1. Didn't need to be done, and 2. Made it worse

See this thread for the situation (only a few short posts to read)... https://5thgenrams.com/community/threads/alignment-question.36527/ Trying to decide to get it redone at a tire shop or just leave it since it is technically in spec? Spec sheet attached.

I am in WI. Around here it is well known that if you want to get the job done get an Ariens. I have two of them, one single stage (208cc) and one double (254cc). For your uses based on your post, get a 24" or 28" Deluxe model two stage. They are $1200 or $1300 new I think now (I paid $1100 for...

I have a new-to-me Simplicity Regent 42" tractor (2016 model year, I think) with fabricated deck that I bought in June. It needs new blades before next year, and I want to put them on this fall. I have no idea what blades to get. Did not find any at Fleet Farm that were a match to fit.. Would...

I paid $50 for 350cca made by East Penn a few months ago at Lowes

Have a new to me 2015 model year Briggs Professional 23 hp engine. It is on a Simplicity Regent. Any ideas on aftermarket non OEM filter size?

Was built June 23. Shipped June 24. Still waiting to be delivered 600 miles to eastern WI.

Yeah. Still waiting on mt Limited build. Been about 9 weeks so far, have heard nothing from the dealer since the VIN was assigned 8 weeks ago.

Make sure to run it for 10 min so it gets through the carburetor. I put Startron and Seafoam in the gas can right after filling it, so the gas I use always is treated. For when to change the oil, it doesn't matter.

42" fab deck