Recent content by qingcong

What path does it take to get into the oil?

Just a curiosity question, assume your injectors and valves are gunked up in your port injected car. Then you start putting in Shell V Power or a bottle of Techron to clean that stuff away. Where does the gunk go after it's washed off?

I asked Fram what viscosity they tested their pressure difference at, and this was their reply. It seems they were all tested per ISO4548, so perhaps they are apples to apples.

This all makes sense. So the FRAM not specifying the centistokes means it's not possible to compare apples to apples. The Purolator Boss with 16kPa at more than 2x the nominal flow rate of the others, that seems like a massive reduction in flow restriction compared to the One and M1.

I asked and without any drama received the spec sheets for the Purolator One PL14610, Purolator Boss PBL14610, Mobil 1 M1-110A, and Fram Ultra Synthetic XG7317. We are a Honda family so I asked about the specific models that fit our Hondas. Purolator and Mobil 1 all appear to be made by Mann...

The installer does premiumshield elite so I just went with that. Based on that video a few posts ago it seemed the premiumshield yellowed more quickly than some other PPFs. Oh well, at least it's protected from rock chips.

Following up, I got the car PPF'ed and I took it home and applied CQuartz UK 3.0. I know some people think this kind of work isn't worth it on a Honda Fit, but I think it's the opposite. For a car that's a daily driver where we'll be taking it on road trips and we'll likely be keeping it for...

Okay thanks. The quote says they are doing a wash/iron/clay/polish on the entire car and he said that to me over the phone as well, so I think I'm good there. It sounds like I can take it home and apply some sealant/wax/ceramic since they are doing the prep work on the entire car.

So back to my original question, it seems you have quite a bit of experience in this. Would $1400 for the following work be a reasonable cost? wash, iron, clay, polish entire car apply PPF to front bumper, fenders, hood, side mirrors

Premiumshield Elite. I talked to the installer today. He says they wrap whatever they can but then certain things like where the fender and bumper meet, they can't wrap.

It is yellow. Does the color matter for PPF?

I understand why some people may think this, but I would disagree with the sentiment. If the Honda Fit makes my wife happy and looking at it brings her joy, then we're going to want to take care of it so that she can enjoy the car as long as possible. If it was my car I would say the same thing.

I don't know, I guess I'll ask. Either way, I assume wrapped edges look best?

I got a quote from our local detailer for PPF work and it breaks down like this: $1400 includes- wash, iron, clay, polish entire car apply PPF to front bumper, fenders, hood, side mirrors Is this a reasonable cost for the work? The car is 2019 Honda Fit. The paint is still in pretty good shape...

To be fair to the mechanic, this is becoming somewhat of a more obscure issue. I think he was trying to replace as little as possible to save me money, but it looks like there's more to it than he initially thought. I'm taking it back tomorrow and we'll see if he can get it done right.