Recent content by 508

I App. All the Above posts.. Fellas' I will use the RED Grease, that Clears up alot of Questions, Thanks again! Larry

Thanks for reply Johnny, It is for sure JT-6 NGL No.2 and predominately Green Label, and almost Clear Lube,says outstanding Water Resistance.Thanks Larry

Does Anyone have any first hand Experience with "Mystick JT-6 it's an almost clear Grease and will really stay where it's Put just wondering as to where it could be used Effectively, hopefully Wheel bearings, tractor ball joints/Auto Etc, Doesn't say much on the tube, A little thicker that...

Sooo.. Valvoline is a FORD Spec. Grease Right! Larry

I've done that Actually, Slowly take the Plug out, Immediately cap Your Finger over the Outlet, Have someone to Put the gasket on the Plug, and reverse..You really won't loose enough to Worry about.

Just Wipe off the ANTISeize Compound,... They will take them back!

Yep! Most Likely it is Corrosion, With the Lights "OFF" take a Small Screwdriver and Lightly Scrape the Internal center Connection/S and also make sure the bulb Bottom Connections are Bright n Shiny also Clean them, In Adition, Put a DAB of Silicone Grease on the Bulb Base ,.... Unless there is...

Well.. This is My First Post, As I just found the Forum, And it is Awesome! as the Info. Avail.*About Batteries, Interstate and Delco are the Ones I have the best Track record with.. Although I have a 2001 Ford Focus with the original batt in it, I can't believe it's Still cranking the car, BTY...