K
kschachn
Latest activity Postings About
-
-
KFWIW, Mobil Delvac 1 ESP 5w-40 is the best oil that can go in that motor unless he's motivated to use Delo ADF600. He wasn't far off...
-
Kkschachn replied to the thread Mobil 1 Full Synthetic 0W-40 (SP) | 6,000 miles | 2018 Mercedes-Benz GLC 300 | 77,000 Miles.Who said that?
-
Kkschachn reacted to fantastic's post in the thread Mobil 1 Full Synthetic 0W-40 (SP) | 6,000 miles | 2018 Mercedes-Benz GLC 300 | 77,000 Miles with
Like.
The winter grade isn't a problem & that oil is great. -
Kkschachn reacted to johnmyster's post in the thread LSJr tests and discusses DexosD babymax oils with Like.
I guess you're right. The "highly upgraded" LZ0 has trust bearing wear that the LM2 does not, so they're entirely different animals...
-
Kkschachn reacted to McRightclick's post in the thread Trying to decide between HPL Premium Plus PCMO -vs No VII PCMO? with Like.
Third vote for shooting Dave an email, he was extremely friendly and informative when I did so. He will also not try to upsell you and...
-
Kkschachn replied to the thread LSJr tests and discusses DexosD babymax oils.I’d love to hear your analysis of that “plenty of data” and how “it’s there”. And you misunderstand, it’s not that I don’t like used...
-
Kkschachn reacted to WarEagle's post in the thread LSJr tests and discusses DexosD babymax oils with Like.
I think one of @kschachn (and he can correct me if I am wrong) main points is using an UOA to compare wear between oils. He has...
-
Kkschachn replied to the thread LSJr tests and discusses DexosD babymax oils.The objective is measuring wear differences between oils. What I’m saying is that using these UOA like this is technically wrong. Flat...
-
Kkschachn replied to the thread 10w30 SP in a Cummins.Short-term, nothing. But you'd be foolish to keep it that way IMO. That's not a diesel rated oil and towing really isn't the issue. I...
-
KI will flame the plastic before I prime. That’s about the best I can do. I had some luck with that when I used this board on another...
-
Kkschachn replied to the thread Keep 2007-era garage door opener?.Here is what Chamberlain says on their website. That seems crazy short to me:
-
KI ordered some Loctite 770 primer and some 425 from Grainger. I'll give it a try and report back on the results. Thanks!
-
Kkschachn replied to the thread Adhesive for Stainless Screws in HDPE.As you note, nothing is going to stick to such a material without some kind of surface modification. I wouldn't expect much no matter what.
-
Kkschachn replied to the thread Keep 2007-era garage door opener?.My similar Chamberlain chain drive openers are both 26 years old, I replaced the drive gear assembly once, perhaps twice. We have a...
-
KAnd, according to the techs that installed my new Chamberlain jackshaft opener, the battery will be dead long before you need it anyway...
-
-
Loading…
-
Loading…