Hello this is my first post on this forum. I would like some advice on running light weight oil as fuel.
I recently acquired 1,000gal of "mold oil". Oil that is sprayed on concrete form molds from a plant that makes concrete fiber siding for homes. The oil is filtered and reclaimed several times.
I was wanting to burn this in a old mechanical injected ford 7.3L IDI.
It would be filtered through four filters;
30 micron
17 micron w water separator
12 micron w water separator
2 micron cat 1R_0749
I recently acquired 1,000gal of "mold oil". Oil that is sprayed on concrete form molds from a plant that makes concrete fiber siding for homes. The oil is filtered and reclaimed several times.
I was wanting to burn this in a old mechanical injected ford 7.3L IDI.
It would be filtered through four filters;
30 micron
17 micron w water separator
12 micron w water separator
2 micron cat 1R_0749