My GS300 wipers are acting all weird. They work fine when moving. They go up all the way and down all the way. Problem is when I turn off the wipers they don't slide down into what I call the "park" position. They come almost all the way back down but stop about 3-4 inches from disappearing. I don't wanna start changing nuts if that is not the problem. On the up stroke they come right to the edge of the windshield pillar on the driver's side. That looks great. On the down stroke the go all the way down. It's the park position that is messed up. Suggestions?
Wipers Won't Go to Park Position
- Thread starter Gebo
- Start date
- Status
Probably the sensor board in the motor assembly, needs replaced as an entire assembly.
Had that issue with beam wipers. Swap ur wipers first.
Did you something to the wipers?
Had that issue with my Sienna after I changed the wiper motor.
I would try to reposition the wiper blades first. If that doesn't work you may need to remove the the cowl and whole aseembly and figure out how its supposed to be positioned at the park position.
Had that issue with my Sienna after I changed the wiper motor.
I would try to reposition the wiper blades first. If that doesn't work you may need to remove the the cowl and whole aseembly and figure out how its supposed to be positioned at the park position.
Your wipers are just in the winter position. Just need to push them down to the summer position.
https://www.clublexus.com/forums/es-1st-...modes-pics.html
https://www.clublexus.com/forums/es-1st-...modes-pics.html
Interesting, I never heard of that before. Thanks.
I learn something new everyday.
Thanks for posting.
Thanks for posting.
Take the wiper control box apart and look at the circuit board. If any solder “blobs” look cracked where wires attach use a fine electric soldering iron to “re-melt” them. This was a standard fix on 90’s chev trucks.
Whoops. Just read the Lexus fix.
Whoops. Just read the Lexus fix.
Last edited:
It's a faulty limit switch in the motor gear housing. Likely has a wiper that has some loose ... Need whole rebuilt assembly. Prolly no parts not available separately ...
Sorry , you’re going to have to rid of the car. It’s unfixable.
.
- Status
Similar threads
