Where do I get SP III ATF?

[BTLew81]

I'm only going to be doing an extraction through the dipstick on the ATF, so I want to do with genuine SP III. I have a feeling the dealer will kill me on price. Anywhere I can get this that you know of?

Thanks!

 

[cmhj]

Kia, Misubishi and Hyundai dealers.

 

[askani79705]

http://www.castrol.com/castrol/sectiongenericarticle.do?categoryId=9012226&contentId=7028224
a good multi vehicle

 

[unDummy]

http://www.pzlqs.com/Tech/Pdsheet/Domest...issionFluid.pdf

 

[BTLew81]

Any problems mixing Castrol Multi with factory fluid? UnDummy...can't get that page to open!

 

[unDummy]

The link requires adobe acrobat reader.

There is no problem mixing fluids that meet similar specs. So, if you plan on doing topoffs, or partial drain/refills, you can use the Pennzoil or Castrol ATF with your old SPIII.

 

[askani79705]

I used atf +4 in my Galant for 4 years and roughly 90000 miles
no problem.Started after a flush with Castrol multi and no problems 1200 miles later.

 

[BTLew81]

I have adobe....still no workie. Any warranty concerns by not using SP 3?

 

[askani79705]

try this: http://www.castrol.com/castrol/printsect...ntentId=7028224

 

[Tempest]

Quote:

---

I used atf +4 in my Galant for 4 years and roughly 90000 miles
no problem.Started after a flush with Castrol multi and no problems 1200 miles later.

---

Did you use the Castrol first for 1200 and then go to the +4 for 90K? Or the other way around so that you are on the Castrol now?

 

[askani79705]

Using castrol now, the multi vehicle wasn't available in my area till now

 

[Tempest]

Thanks.