Since Aisin made your transmission, that Aisin WS fluid should be good for it. I'm guessing it is probably foreign (non-North American) market packaging.
Originally Posted By: engineer20
i see. i guess ps is ok but not so much for the brake fluid
is bleeding difficult/takes lots of work or no?
I use the turkey baster for brake fluid to get the flush started. No point in flushing all that old fluid through the lines, waiting for it to get clear, when I can finish the job faster by starting with a reservoir full of clean fluid.
Be careful with brake fluid, it makes a GREAT paint remover.
There are plenty of good Youtubes and HowTo's on brake bleeding. The primary caution is not to suck air back into the lines. On some vehicles, pushing the brake pedal to the floor can damage the master cylinder. In this case, a short piece of 2x4 underneath can limit the travel and still provide enough throw to accomplish the bleed. Or, use the vacuum method.