Originally Posted by spasm3
Since you have not owned it since new, i'd take apart inspect and regrease. What axle do you have? There is the Never lube, and the ez-lube axles. The Ez-lube have a grease fitting that greases the inner and outer race bearings. I have the ez lube, i've had it since new and i grease it regularly. I don't feel i need to take it down yearly.
My previous 05 jayco had EZ-lube axles, so i suspect thats what you have. Check your manual or pull the axle cap off like in the video below and see.
I jack up the trailer, spin the wheel as i slowly inject the grease. You want to grease SLOWLY so that you don't push grease out of the rear seal and contaminate the brake pads. Don't use electric or air powered grease guns.
I wouldn't use that. You want to get the old grease out, replacing it with new grease and the only way to do it with an E-Z lube is to destroy the seal. Besides, I would want to inspect the bearings as well.