2000 Silverado 4WD extended cab. Had upper and lower control arms and one ball joint replaced. Replaced front hubs (bad bearings). Vehicle was aligned.
Left front tire is worn more than the others. Then the right front tire. Rear tires have pretty even tread but inner edges are cupped from being on the front prior to the repairs but and before the alignment.
Not sure when the front tires began to wear.
In any event, thinking of rotating rear tires straight forward. Should I move front tires straight back or cross them over?
Left front tire is worn more than the others. Then the right front tire. Rear tires have pretty even tread but inner edges are cupped from being on the front prior to the repairs but and before the alignment.
Not sure when the front tires began to wear.
In any event, thinking of rotating rear tires straight forward. Should I move front tires straight back or cross them over?