Do any of you, who have responded above about LM oils, can tell me where to find test info on LM 5w30 oil? I am not sure it is 100% synthetic oil, but a blend of conventional and synthetic.
For example Valvoline Synpower shows a complete breakout of their synthetic oil.
See below:
Valvoline Synpower Test for 5w30 MST (I have removed info on their other Synpower oils that were listed to shorten the list).
Vis @ 100°C (cSt)
11.7
Vis @ 40°C (cSt)
69.9
Viscosity Index
163
Spec Gravity @ 60°F
0.85
Density(lbs/gal)
7.1
Total Base No.
7
Flash COC (°C)
227
Pour Point (°C)
-45
CCS cP (°C)
6200(-30C)
MRV TP-1 cP (°C)
20,000(-35C)
NOACK, wt. % loss
10
Sulfated Ash
0.78
Zinc/Phosphorus, wt.%
0.084/0.077
Calcium
0.193
This information only applies to products manufactured in the following location(s): USA, Canada.
Effective Date:1-22-09
Rev 007
For example Valvoline Synpower shows a complete breakout of their synthetic oil.
See below:
Valvoline Synpower Test for 5w30 MST (I have removed info on their other Synpower oils that were listed to shorten the list).
Vis @ 100°C (cSt)
11.7
Vis @ 40°C (cSt)
69.9
Viscosity Index
163
Spec Gravity @ 60°F
0.85
Density(lbs/gal)
7.1
Total Base No.
7
Flash COC (°C)
227
Pour Point (°C)
-45
CCS cP (°C)
6200(-30C)
MRV TP-1 cP (°C)
20,000(-35C)
NOACK, wt. % loss
10
Sulfated Ash
0.78
Zinc/Phosphorus, wt.%
0.084/0.077
Calcium
0.193
This information only applies to products manufactured in the following location(s): USA, Canada.
Effective Date:1-22-09
Rev 007
