Small engine air filter help needed.

[Doc8404]

Vitacci Pentora 200EFI
Chinese ATV
GY6 engine knockoff.
169cc

I considered a universal clamp on and just not use the air box, but am concerned she will get too much air and run lean.

Height:
100mm
3 7/8”
3.875”

Overall diameter:
74 mm
2 4/5”
2.8”

Inner lip diameter:
60mm
2 2/5”
2.4”

Inner diameter:
46 mm
1 4/5”
1.8”

 

[Imp4]

How about just using a GY6 air filter???
Should be readily available.

 

[Doc8404]

How about just using a GY6 air filter???
Should be readily available.

I wish you were right.
They are way too big.

 

[doitmyself]

Did you try the WIX filter finder page where you can plug in the filter style and dimensions, then search their data base?

Search by Size

m.wixfilters.com

 

[Doc8404]

May have to try it and just read the plugs.

https://smile.amazon.com/NIBBI-RACING-Motorcycle-Filter-Performance/dp/B07KQZMVF3/ref=mp_s_a_1_19?crid=3ES8WJH5RPDIW&keywords=uni+clamp+on+air+filter&pscroll=1&qid=1657215083&sprefix=uni+clamp+on+air+filter%2Caps%2C156&sr=8-19&wIndexMainSlot=31#aw-udpv3-customer-reviews_feature_div

 

[Doc8404]

Did you try the WIX filter finder page where you can plug in the filter style and dimensions, then search their data base?

Search by Size

m.wixfilters.com

I will try it again.

 

[Doc8404]

Did you try the WIX filter finder page where you can plug in the filter style and dimensions, then search their data base?

Search by Size

m.wixfilters.com

nothing!!!

May have to try a clamp on Uni two stage and monitor the plugs.

Since it is EFI, and Chinese, there is no remapping.

 

[doitmyself]

Yes, you may have to custom fit something.

I tried the STENS site and came up with 055-798, 102-285, and 102-918 . Not to your dimensions exactly, but maybe you can make modifications? Good luck - very tough sizing that filter.

 

[blufeb95]

Can you swap the airfilter housing for something that you know you can find.

 

[Doc8404]

Can you swap the airfilter housing for something that you know you can find.

Looking at that now.

Might try a Uni two stage filter and monitor the plug.

 

[Doc8404]

Yes, you may have to custom fit something.

I tried the STENS site and came up with 055-798, 102-285, and 102-918 . Not to your dimensions exactly, but maybe you can make modifications? Good luck - very tough sizing that filter.

Thank you. I will check those out. If it is the height/length, I can probably rig something up to make it fit in the box.