JHZR2
Staff member
As some know, I work in battery technology, amongst other areas. But I am not an EE, so am thinking out loud here...
I own seven cars and some of them do not get use in the winter (maybe once or twice over many months). One of those cars gets kept in a garage that is in a shady spot and does not have electricity. So keeping a battery tender type of device, even a solar one, isnt a straightforward proposition. Turning on and running a vehicle until a battery is truly fully charged (constant current then constant voltage until the current is, say,
While Im likely to do that, its the intermittent swings where both self discharge, thermodynamics of cold weather, and parasitics of the vehicle draw down the battery voltage to a point where sulfation and other bad things can occur.
One of the first things I do on my vehicles is add an SAE 12V connector, which is the standard interface for the Battery tender and minder brand chargers, so I have these connections...
So my thought is to connect a second 12V battery via this conenction, ONLY for the purpose of having double energy for the time spent sitting.
It would be fuse protected on positive and ground, at the second battery, for say, 2A. It would be connected after the car is shut down, and removed before the car was started.
So the only issue is that the two batteries would over time and over vehicles be different in size and capacity as compared to the installed battery in the car. Notionally the car would always be put away with a full battery as is my practice.
The intent here is just to roughly double the duration before the car's battery got sulfated or damaged. Concerns or issues????
Thanks!
I own seven cars and some of them do not get use in the winter (maybe once or twice over many months). One of those cars gets kept in a garage that is in a shady spot and does not have electricity. So keeping a battery tender type of device, even a solar one, isnt a straightforward proposition. Turning on and running a vehicle until a battery is truly fully charged (constant current then constant voltage until the current is, say,
While Im likely to do that, its the intermittent swings where both self discharge, thermodynamics of cold weather, and parasitics of the vehicle draw down the battery voltage to a point where sulfation and other bad things can occur.
One of the first things I do on my vehicles is add an SAE 12V connector, which is the standard interface for the Battery tender and minder brand chargers, so I have these connections...
So my thought is to connect a second 12V battery via this conenction, ONLY for the purpose of having double energy for the time spent sitting.
It would be fuse protected on positive and ground, at the second battery, for say, 2A. It would be connected after the car is shut down, and removed before the car was started.
So the only issue is that the two batteries would over time and over vehicles be different in size and capacity as compared to the installed battery in the car. Notionally the car would always be put away with a full battery as is my practice.
The intent here is just to roughly double the duration before the car's battery got sulfated or damaged. Concerns or issues????
Thanks!