Replacement pump for powerwashers

Dk7166

Thread starter
Joined
Jun 2, 2024
Messages
3
Location
Indiana
I'm needing a replacement pump for my Simpson 3,000 PSI honda powered GCV190 power washer and I can't find one does anyone have any suggestions? I'm also needing a replacement pump for a Excell 2,600 psi powerwasher with honda GC190?
I also have a campbell hausfeld with a honda GCV160 that needs a new pump where can I get pumps at I've looked all over online and can't find the correct pump. I've purchased 3 different ones from Amazon and they were not the correct one. Or which one would be the best one to get back up and running they all three need a new pump.

17196923836836552398686581862162.webp


17196923988523087853084540668145.webp


17196924208611205730458060928508.webp
 
I have that same excell pressure washer. It looks like yours still has the original “wiggle waggle” pump. I replaced mine last year with a Chicom adjustable axial pump and so far has done a good job. I ordered mine from the “ rop shop “ on the www. Less than $100 and free shipping. I cleaned my two level deck, 2 sidewalks and my 75 foot driveway without even as much as a hiccup.

IMG_1159.jpeg


IMG_1307.jpeg


IMG_1523.webp
 
Last edited:
The vertical shaft ones are always the budget ones. You can get triaxial pumps. Maybe look for an AR pump.
The horizontal shaft one is the better one.

People overuse pressure washers around the house. Except for the sidewalk all the other parts of your home should be soft washed.
 
Back
Top