PROTEC PXL 10290 CUT OPEN

Joined
Mar 12, 2015
Messages
34,439
Location
In the shop
Off of a 24’ GMC TERRAIN at work. Unlike oil pan 4 and scant/little and lack of photos for god unforeseen reasons; you will get real story and facts and lots of pics from me. Tan with Safety Kleen 0w20 oil for 7,500 oci


In/on: same

IMG_5134.webp


IMG_5135.webp


IMG_5136.webp


IMG_5139.webp


IMG_5138.webp


IMG_5137.webp


IMG_5132.webp


IMG_5140.webp


IMG_5135.webp
 
I'm surprised to see a silicone ADBV on these Protec jobber filters. I've ran the WIX WL10290 for a few years now with no problem, will cut one open whenever I do the next oil change on my Spark. Looks like a much better made M+H filter in comparison to the Microgard you just posted.
Most of the PROTECS we use at my work (large fleet) use silicone. Exception is the PXL 51334; still uses nitrile.
 
I'm surprised to see a silicone ADBV on these Protec jobber filters. I've ran the WIX WL10290 for a few years now with no problem, will cut one open whenever I do the next oil change on my Spark. Looks like a much better made M+H filter in comparison to the Microgard you just posted.
i got a handful of the wix 10290 from rock auto last year , and saw some posts a while ago about the louvers not being open , so i went and had a look at mine to post up pics , mine were about as bad , bad enough that im now using fram ultra
 
i got a handful of the wix 10290 from rock auto last year , and saw some posts a while ago about the louvers not being open , so i went and had a look at mine to post up pics , mine were about as bad , bad enough that im now using fram ultra
I’m stocking up on wire backed Titanium’s now. Already have lifetime supply of OG ULTRA for Dakota and Focus too.
 
Back
Top Bottom