Pennzoil Conventional GF-5

Status
Not open for further replies.
Joined
Aug 30, 2004
Messages
35,341
Location
CA
I have read a number of threads with conflicting information in regards to the Pennzoil Conventional oil being updated to GF-5 standards.

Has this upgrade officially occurred? Or is it still in progress?

If I get an oil change from a Jiffy Lube that is supplied with bulk Pennzoil, will I receive the GF-5 product? For how long has the GF-5 version been in the pipeline?

Thanks.
 
From what I read and see is the GF-5 is out in their newly designed/labeled Pennzoil conventional bottles but isn't "officially" out till October. Bottle reads "Meets or Exceeds GF-5" but isn't GF-5 certified as of yet.

As far as the distribution pipeline who knows, its possible they may have it given how quick they go through oil.
 
http://www.gf-5.com/


* Improved phosphorous retention (ZDP) to enable emission system durability while maintaining engine protection
* Increased levels of organic/inorganic Friction Modifiers to meet improved fuel economy and fuel economy retention
* Enhanced emulsion and rust protection for Flex Fuel Vehicle specifically those that run on ethanol based fuel (E85)
* Greater seal compatibility to help ensure seal longevity and prevent oil leakage in older vehicles, as demonstrated by a new seal test specifically developed for GF-5


Can read about it! :)
 
Last edited:
Since officially GF-5 is not available until 10-1-10 I doubt you'll see it officially till then.

Anytime there is a new spec the transaction period will take months or years. I'd not expect an 100% guarantee that you WILL get GF-5 way after 10-1-10 or until the container is marked so.

Not that big of an deal unless you have a vehicle that REQUIRES GF-5 to be used. I'd certainly not spend any time looking for it.

Bill
 
Status
Not open for further replies.
Back
Top Bottom