Which is better to run with your gas to keep your fuel system clean? I only use shell or quick trip gas, both are top tier gas. I've been using shell v power or ago cleaner both I picked up cheap at big lots. I've heard seafoam and chevron are good cleaners. Any insite would help.
oil or solvent based cleaner
- Thread starter OKSTEVE
- Start date
- Status
I don't see any need to be using a dedicated high-strength cleaner on a continuous basis as is being alluded to. My own preference is to get and maintain additional lubrication in play for the fuel system support components... MMO/zMAX/TC-W3, etc. The 1st two may still net you some cleaner valves and/or injectors over time.
gathermewool
Site Donor 2025
Why not have both? I've been meaning to start running a continuous maintenance dose of Redline SI-1 at around 3 oz./fillup. I have a case at home, but only recently found the perfect container to meter the dose - a 6 oz regane bottle that I'll mark at the half-way point.
IIRC, Redline's FI cleaner is more of a PEA-based cleaner than a lube, but that's fine with me.
IIRC, Redline's FI cleaner is more of a PEA-based cleaner than a lube, but that's fine with me.
- Status