I did the first engine oil change on our new to us 2016 Nissan Quest yesterday. On later model Quests, Murranos and Pathfinders, the oil filter is accessed through the right side fender well, behind a removable panel that's held in place with 4 push plug fasteners. You basically crank the wheels all the way to the right, which gives good access to this area. The OEM plugs have 3 notches in the head that are 120deg apart, so my little push-plug pliers didn't work well, so I wound up using a 90deg pic to pop the heads on the fasteners to release them. One of them shot out on me bouncing around under the car like a pin-ball and I was never able to find it, so the panel is currently held on by 3. Does anyone know the proper size or p/n for replacement plugs? I can find the panels all day long online, but not the hardware. I can pull another plug to use as an example and try Lowes or whatnot, but I thought I'd try here first since that would render the van inop (unless I want to loose the panel entirely) Thanks.