just to give some background it's a new pushrod 5.0 that i put together and is in my 92 F150.. it has 1800 miles on it now. remanned shortblock .030 over with Flat Tops, Trick Flow Track Heat 170/58cc heads and a Comp Cam XE-264HR-14 in it, with 1.72 Roller Rockers. Very Healthy Engine..
so the oil i chose to go with is.
Valvoline 5w30 Synpower... and motorcraft FL-1A filter (only filter i'll ever run on a Ford)
think it's gonna be a good combo and will probably quiet down the entire valve train.. Typical roller rocker noise.
done alot of reading and it's some good stuff... gonna be going 5-7k mile OCI's
bought it all at o'reilly's... 37.24 was my total after tax...
so the oil i chose to go with is.
Valvoline 5w30 Synpower... and motorcraft FL-1A filter (only filter i'll ever run on a Ford)
think it's gonna be a good combo and will probably quiet down the entire valve train.. Typical roller rocker noise.
done alot of reading and it's some good stuff... gonna be going 5-7k mile OCI's
bought it all at o'reilly's... 37.24 was my total after tax...