Hi all here is my latest C&P. The can and base plate seemed reasonable for a small engine filter. To my surprise it did have an ADV and appeared to be made of silicon rubber. The oil in the bottom of the can seemed pretty clean. I debated against changing but it's almost time to put the mower away for the season. Hopefully I have cut the grass and leaves for almost the last time.
Filter area is 56.4375 Square inches. I measured 7/16" deep pleat, 1-1/2" long and counted 43 pleats.
The filter has been used since I bought the mower the end of May, The engine had Mobil 1 10W30 HM in it. I put in Super Tech Full Synthetic 10W30 HM and a bigger Motorcraft FL-400S back on.
Todd
Filter area is 56.4375 Square inches. I measured 7/16" deep pleat, 1-1/2" long and counted 43 pleats.
The filter has been used since I bought the mower the end of May, The engine had Mobil 1 10W30 HM in it. I put in Super Tech Full Synthetic 10W30 HM and a bigger Motorcraft FL-400S back on.
Todd
