I have a small coolant leak, so today I cleaned the radiator real good and took it for a drive, when I came home I popped the hood and the radiator tube on the radiator by my tank and it is the 2nd one down from the top had a small coolant leak. It is where the tube meets the tank. I called up Bars Leak and the guy told me that it is hard for his product to work in that area because it is at the top of the radiator. I stood there and watched it ooze out slowly for 30 seconds and then it stopped. The Bars Leak guy recommended I use Jb Weld. I plan to clean the area again and maybe even drain the radiator, then mix the stuff, put it on and let it sit for 24 hours. Any thoughts would be appreciated.