Input Shaft Seal

[borgward]

2013 Fiesta 5 Speed Manual. R & R input shaft seal. Installing used transmission. Replacing output shaft seals. Input shaft seal hard to find. Is YS4Z2704800 the right part?.
Any advice on removing and replacing the seal?

 

[bdcardinal]

Is YS4Z2704800 the right part?.

No, the input shaft seal number is CN1Z7048A. It is very available. If your local dealer doesn't stock it, I know we sure don't, it should be overnight or at worst 2 days out. These are all the Ford PDCs in the US and their quantities on hand.

 

[borgward]

I am getting conflicting #'s for the input shaft seal.

Part Number: YS4Z7048AA
Supersession(s): YS4Z-7048-AA
View YS4Z7048AA Manual Transmission Input Shaft Seal Full-Sized Product Image for 2013 Fiesta and CN1Z7048A for 2014 to 2019.

I am guessing they are both dimensionally the same, and that CN1Z7048A may have better material in it. That would be unless the 2013 shaft has a different O.D. and or the case has a different I.D.

Another issue is that I do not know what the year of the used transmission is. Anyway to I.D. it? Found numbers on a white tag on it:
BA6R 7002 AA AA7
TRQ2A 101110 00886

 

[bdcardinal]

That fits 2011-2015 Fiesta IB5.

I went to a 2012 Fiesta listing which shows both and there is a build date split. Usually a salvage yard, at least the ones that I deal with, will give the VIN from the vehicle that the assembly came from either on the invoice or upon request to verify it is correct.

 

[borgward]

No VIN on paperwork. Thought about contacting salvage yard.
Thinking I will buy both seals to compare with what's in the used transmission.

 

[borgward]

CN1Z-7048-A and YS4Z-7048-AA appear to be almost the same seal.

CN1Z-7048-A maid in Brazil FORD 437A 96WT-7048-A9A BRUSS 11 >FE/ACM< AS 21,5X48X8,4 RF
YS4Z-7048-AA maid in Spain FORD F437A 96WT-7048-A9A BRUSS 15 >FE/ACM< AS 21,5X48X8,4 RF

These are the numbers off of the seals themselves. They appear to be dimensionally the same.

I am going to put the YS4Z-7048-AA one in the used transmission along with new half shaft seals. I will save the CN1Z-7048-A seal for when I rebuild the transmission that I just removed from my car.