GLASS headlight hazing

Status
Not open for further replies.
Joined
Mar 14, 2004
Messages
119
Location
California
Hi. I know there is a post here about cleaning plastic headlights that haze, but I was wondering about glass headlights. I just bought new, brighter, whiter headlights for my car so I want my headlight glass sqeaky clean. How do you guys clean the glass so it's clear? My car is ten years old so it needs some help. Thanks
 
get some water spot remover from the dealer or something that you rubb on the window. i use this green stuff from the dealer.

it will polish glass and get it nice and clean. try it. it has light abrasives in it
 
quote:

Originally posted by digitaldrifter91:
get some water spot remover from the dealer or something that you rubb on the window. i use this green stuff from the dealer.

it will polish glass and get it nice and clean. try it. it has light abrasives in it


As he said, Go to walmart, grab a can or two of invisible glass, Works good on windows ( auto or home) so might work good on head lights also.
 
I went to Pep Boys today and saw a can of Invisible Glass. I then looked at it, but it didn't seem to have enough strength to clean and then polish my glass headlights. I then asked the guys working there and they showed me BlueMagic plastic polish. On the plastic polish bottle, it recommended Metal Polish Cream for some reason (for better results in polishing?) So I got a little tub of it. It's called BlueMagic Metal Polish Cream. What do you guys think? Will this clean up my headlights?
 
The BlueMagic did not do anything to the glass headlights. My main problem are the tiny little scratches in it from 10 years of service more than them being dirty. Does it look like my only real solution is to use something like a sander?
 
The bulb comes out. Well, the glass is not as in bad a shape as I may have made it sound. I just prefer having clearer glass. I wonder if the headlights with the multi-reflector are glass or plastic. I think most now are plastic.
 
Look at some of the sites on making telescope mirrors, as they have a full range of abrasives. I use 5 and 15 uM aluminum oxide on my leather strops for knife sharpening, and find that the 15 uM works ok to polish up the headlights on an 11 yr old Taurus. It is too fine to get all of the big scratches out, but I just wanted to take the haze off. The key with abrasives is to use a range, and to expect that reeaaaal smooth glass takes a long time to do by hand. If I were buying abrsaives for polishing headlights I'd probably start with something bigger, say 25 uM, and then finish off with 10 uM or so. Silicon carbide will work better than aluminum oxide on tempered glass, but I don't recall how fine of grit it's available in.
 
Status
Not open for further replies.
Back
Top Bottom