M mewisemagic Joined Aug 29, 2006 Messages 145 Location n.c. Dec 18, 2009 #1 how hard is it to change and where to start?
Jason2007 Joined Apr 5, 2007 Messages 865 Location virginia Dec 18, 2009 #2 If I remember correctly it is on the drivers side frame near the front. Not too dificult.
JHZR2 Staff member Joined Dec 14, 2002 Messages 55,303 Location New Jersey Dec 18, 2009 #3 just have some clean glass jars nearby to catch drainage, so you can reuse.
Kruse Joined Oct 5, 2005 Messages 5,648 Location Kansas Dec 18, 2009 #4 Originally Posted By: mewisemagic how hard is it to change and where to start? Remember to keep an incandescent trouble light bulb away from the dripping gas.
Originally Posted By: mewisemagic how hard is it to change and where to start? Remember to keep an incandescent trouble light bulb away from the dripping gas.
FADEC Joined May 26, 2009 Messages 855 Location Hill Country TX Dec 18, 2009 #5 Check out this site. Very good info and pictures. http://www.gm-trucks.com/resources/how-to/2009/01/22/how-to-change-your-fuel-filter/
Check out this site. Very good info and pictures. http://www.gm-trucks.com/resources/how-to/2009/01/22/how-to-change-your-fuel-filter/
P PT1 Joined Feb 6, 2007 Messages 5,746 Location near the mistake Dec 18, 2009 #6 That was one part I always had the dealer do. I could never get them off easily. But I would change it every 20-30k.
That was one part I always had the dealer do. I could never get them off easily. But I would change it every 20-30k.