Ford CSP on HCU failures on CD3 cars

Joined
Oct 7, 2012
Messages
5,425
Location
Staten Island, NY
I posted this on the Fusion subreddit, but I thought people should know here too

If you have a 2006-2010 Fusion/Milan/MKZ or Zephyr built between February 22, 2006 through July 15, 2009

And you had the recall done, and or you still have HCU failure, DON'T PAY, Ford has a Customer Satisfaction Program out

Customer Satisfaction Program 21N11 Certain 2006-2010 Model Year Fusion/Milan/MKZ/Zephyr Vehicles Equipped with Anti- Lock Brake Systems Hydraulic Control Unit One-Time Repair


If Safety Recall 19S54 or 20S14 is closed, this program provides a no-cost, one-time repair (if needed) to the Hydraulic Control Unit (HCU) for 15 years of service and unlimited miles from the warranty start date of the vehicle

In addition, diagnostic trouble codes (DTCs) C1095, B1342, B1483, and B1676 are now covered as part of this program.

This is a one-time repair program.

If a vehicle has already exceeded the time, this no-cost, one-time repair will last through December 31, 2022

Coverage is automatically transferred to subsequent owners. If either Safety Recall 19S54 or 20S14 is open, this program does not apply. (19S54/20S14 must have been previously completed).

These HCUs are a moderately expensive job, and all vehicles are covered until the end of this year

Get an appointment ASAP if you've got an older model

Conveniently, both my 2010s aren't covered by the recall, as they're too new

I'm still gonna flush the fluid to DOT4, just to be safe
 
  • Like
Reactions: D60
I have done lots of those in the past long before they were recalled. Used to be about 1000$ for the HCU alone without the ABS module.
 
I wish they had this CSP on the F-150 for the HCU. My HCU recently failed on my 2014 F-150 with 33,000 miles. The dealer called my and told me it would be $2600 to fix it . I thought he was kidding. Looking at getting a rebuilt one
 
Back
Top