Anybody run any "Dynamic Friction" branded brake parts? Looking for coated calipers for the front of my F150 and these seem very competitively prices. But do you just get what you pay for?
Dynamic Friction?
- Thread starter buck91
- Start date
JHZR2
Staff member
I recently bought shoes made by them. I don’t have them installed yet, but the quality seems ok..
I buy a lot of their rotors, they’re fine.
Their pads are average, just typical aftermarket these days.
Their pads are average, just typical aftermarket these days.
edyvw
$50 site donor 2025
I put their rear rotors on BMW when I went with Brembo upgrade. That was only option for E90 in that combination except Zimmerman which were $190 a piece.
The finish is average, but they are holding on well.
I used their track pads as they were really cheap. The finish quality was not good; they were not sitting properly, but they survived one day on track at the rear, where most action is due to electronic diff. that likes to eat pads. Compared to other track pads, they are budget as it gets. Would not use them in front, though.
The finish is average, but they are holding on well.
I used their track pads as they were really cheap. The finish quality was not good; they were not sitting properly, but they survived one day on track at the rear, where most action is due to electronic diff. that likes to eat pads. Compared to other track pads, they are budget as it gets. Would not use them in front, though.