Duragloss Question

[Jason2007]

Im am getting ready to use Duragloss 601 & 105 for the first time. My truck currently has Meguiars Gold Class on it now. Should I do anything to remove the Gold Class before I apply the DG? Thanks

 

[deepsquat]

wash the care with Dawn dishwashing detergent...this removes the wax...if you really want to do a good job...claybar it then wash again..then duragloss.

 

[Lazerred1]

Very thin with the 601 or it's kind a bear to remove. Thin with the 105 also. Give it 24 hours and then another coat of 105, if you can. After first wash, hit it with AW and you'll be amazed. Only do AW about once a month. I use the marine QD after washes.

 

[Jason2007]

thanks for the suggestions. If i read it right I should apply the 601 leave it on and apply 105 then remove them both at the same time. Is that correct ?

 

[Russell]

correct. The duragloss combo really works well

 

[JasonC]

thanks again. Hopefully the weather will allow me to apply these today.

 

[Black Bart]

Quote:

---

thanks for the suggestions. If i read it right I should apply the 601 leave it on and apply 105 then remove them both at the same time. Is that correct ?

---

You are correct DO NOT REMOVE THE 601 apply it thin and apply the 105 over it.
You do not need to wash with dawn that is for ZAINO because he don't have a product like the 601.
The 601 is to make the 105 bond to other polish or wax but if your vehicle has not been clayed and polished for a while doing it before you apply the Duragloss would be a good idea.
The secret to a good looking finish is the prep.