CV / Rack and Pinion Boot Clamp pliers
- Thread starter diyjake
- Start date
- Status
I've used the HF end cutters with the edges dulled a bit so they don't cut through. But the real pliers are pretty cheap.
I’ve been using Oetiker clamps for a while. Stainless steel ear clamps. One time use.
OEM on Volvos and very convenient for most places where you would use a hose clamp. They go on quickly, hold tight, don’t loosen and are cheap.
CV boot clamps are basically big Oetiker clamps.
So, Oetiker clamp pliers. Name brand are moderately expensive. Lots of knock offs out there, but I prefer good tools. I recommend the kind that have both the front and side clamp in the pliers. Particularly around CV boots, you might need the versatility.
https://www.oetiker.com/
OEM on Volvos and very convenient for most places where you would use a hose clamp. They go on quickly, hold tight, don’t loosen and are cheap.
CV boot clamps are basically big Oetiker clamps.
So, Oetiker clamp pliers. Name brand are moderately expensive. Lots of knock offs out there, but I prefer good tools. I recommend the kind that have both the front and side clamp in the pliers. Particularly around CV boots, you might need the versatility.
https://www.oetiker.com/
Lisle 30800
https://www.amazon.com/Lisle-30800-...REPY?source=ps-sl-shoppingads-lpcontext&psc=1
Also available in offset 30600 to get access from the side which is common with rack boots.
https://www.amazon.com/Lisle-30600-Offset-Clamp-Plier/dp/B0080J1200
https://www.amazon.com/Lisle-30800-...REPY?source=ps-sl-shoppingads-lpcontext&psc=1
Also available in offset 30600 to get access from the side which is common with rack boots.
https://www.amazon.com/Lisle-30600-Offset-Clamp-Plier/dp/B0080J1200
OTC 4722 Stinger Heavy-Duty CV Boot Clamp Installer https://www.amazon.com/dp/B005J3L4B...abc_A032E0M8FY06ZH5N6XDN?_encoding=UTF8&psc=1
From what I can see the clamp on my Toyota Highlander looks similar to Oetiker Clamps.
Knipex 10 99 I220. $30ish on Amazon. I had to pick this up to take care of a few Oetiker clamps but I have to “re-boot” a Subaru soonish. It would be nice to have it on hand, if the service kit has ear clamps.
Last edited:
They are, before buying make sure you have access from the bottom, if not get the angle ones. I have both and use them equally as much.
I bought these after Trav recommended them, and they worked very well.
Are you ordering these individually (From the dealer) when performing steering rack boot or inner tie rod replacements? Some OEM's do not list the clamp or clamp sizes in their catalog.
- Status