I recently ordered Auto-Rx and put it in my car after changing the oil and filter. The oil was previously Mobil 1 and was replaced with conventional.
I took my car to do some maintenence done and asked to buy a new oil plug bolt and the dealer misunderstood me and thought I also wanted them to install it, which they did. Much to my dismay, they took the old oil out and replaced it also - without asking me!!!. You can imagine my horror of knowing the Auto-Rx was drained from my car. They put conventional oil in. I had driven approximately 425 miles with the Auto-RX in, 85% on the highway. To keep things simple with my dealer I told them I had synthetic oil in my car and they replaced the new oil with synthetic (Mobil 1) to appease me. I did this because I knew there was no way they were going to replace the Auto-Rx and the cost between the 2 is a wash.
Now, the reason I changed my oil in the first place was because I had synthetic and I did not want to drive the extra miles required for a synthetic clean.
Currently the car still has the new oil filter I installed before putting Auto-Rx in and the car has synthetic oil in it. I do not feel like "wasting" good, fresh synthetic oil, but I only got about 425 miles on the Auto-Rx. I have an extra bottle of Auto-Rx I could put in my new oil, but would I have to change the filter again before?
According to the new instructions, the Auto-Rx ran 1/3 of the full application (I thought the old one said 1000 miles but now it is 1500...).
Car is a Chrysler Cirrus w/104,000 miles. I did not plan to do the treatment for cars w/over 100,000 miles because I had used Mobil 1 since 60,000 miles.
I have emailed Frank, but thought I would ask here also. First post here, began reading a few weeks ago and bought Auto-Rx because of what people have said. Thanks for any opinions...this is highly annoying.
I took my car to do some maintenence done and asked to buy a new oil plug bolt and the dealer misunderstood me and thought I also wanted them to install it, which they did. Much to my dismay, they took the old oil out and replaced it also - without asking me!!!. You can imagine my horror of knowing the Auto-Rx was drained from my car. They put conventional oil in. I had driven approximately 425 miles with the Auto-RX in, 85% on the highway. To keep things simple with my dealer I told them I had synthetic oil in my car and they replaced the new oil with synthetic (Mobil 1) to appease me. I did this because I knew there was no way they were going to replace the Auto-Rx and the cost between the 2 is a wash.
Now, the reason I changed my oil in the first place was because I had synthetic and I did not want to drive the extra miles required for a synthetic clean.
Currently the car still has the new oil filter I installed before putting Auto-Rx in and the car has synthetic oil in it. I do not feel like "wasting" good, fresh synthetic oil, but I only got about 425 miles on the Auto-Rx. I have an extra bottle of Auto-Rx I could put in my new oil, but would I have to change the filter again before?
According to the new instructions, the Auto-Rx ran 1/3 of the full application (I thought the old one said 1000 miles but now it is 1500...).
Car is a Chrysler Cirrus w/104,000 miles. I did not plan to do the treatment for cars w/over 100,000 miles because I had used Mobil 1 since 60,000 miles.
I have emailed Frank, but thought I would ask here also. First post here, began reading a few weeks ago and bought Auto-Rx because of what people have said. Thanks for any opinions...this is highly annoying.