I know my glue posts tend to be regarded as spam. So no more advice regarding the choice of adhesives from me. However, some may find the following helpful. I frequently use C/A glue and I tend to buy it in a 2 or 4-oz bottle because that's more cost-efficient. However, the tips of the bottles tend to gunk up and even if I use disposable precision applicators it's all very messy and tedious and once the bottle is partially depleted the remaining adhesive tends to thicken and finally harden, rendering it unusable.
I fill translucent 10ml C/A glue bottles with the adhesive. These tiny bottles come with precision metal applicator tips and silicone caps that don't get damaged by the adhesive. For $10 bucks you get a bag of bottles and tips and you don't end up wasting half the glue you bought. If the metal applicator tip clogs, a standard straight pin can be used to clean it out.
I fill translucent 10ml C/A glue bottles with the adhesive. These tiny bottles come with precision metal applicator tips and silicone caps that don't get damaged by the adhesive. For $10 bucks you get a bag of bottles and tips and you don't end up wasting half the glue you bought. If the metal applicator tip clogs, a standard straight pin can be used to clean it out.