Any additives with just; B, Ca, and Mg??

[dailydriver]

Is there any additive out there with just high ppm levels of boron, calcium, and magnesium, and WITHOUT any; moly, ZDDP, titanium, etc.??

I know the Torco SEP is probably the closest to what I'm asking for, but are there any others I'm not aware of??

Thanks in advance,

Dave H.

 

[MolaKule]

Do you have some university research or test results that show this trio to be better than what you find in off the shelf major PCMO's?

 

[sprocketser]

Hey Molakule , I would like to learn this stuff but don t have any knowledge about chemistry or else , about what does what & why , do you have some links about these , would be appreciated , can send a PM if you want it too .

 

[MolaKule]

Hi sproc,

Recommend you go to the Science and Technology of Oils and Lubricant Additives and read the Technical Papers and Q&A.

https://bobistheoilguy.com/forums/ubbthreads.php?ubb=cfrm&c=6

There's a lot of non-topical trash there but lots of educational material if you can wade through it.

 

[sprocketser]

Thanx MolaKule , appreciate that , their are some knowledgeable members here , so lots of things to learn , I like to read , so I ll have lots of stuff to learn in there , thanx again .

 

[Donald]

I do not have time to learn everything about everything. I will take the time to research and find a good oil, but not go through every additive and understand why it makes the oil so good.

 

[sprocketser]

I know Donald , sometimes I have the time that s why , just curiosity , want to understand different things . But I understand your point .

 

[MolaKule]

I am glad to see people wanting to learn about oil and additives.

For a list of commercial additve components and what they are used for (their application), here is a good place to start:

https://bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=530321#Post530321

 

[sprocketser]

Thanx MolaKule for the link in there .

 

[vo_marz]

After trying out 2011 tech level racing oils ...
additives goodbye~
Nothing beats a well formulated and up to date tech level oil by a BIG company.

 

[dailydriver]

Originally Posted By: vo_marz
After trying out 2011 tech level racing oils ...
additives goodbye~
Nothing beats a well formulated and up to date tech level oil by a BIG company.


M1R?? (Or something else?)

 

[dailydriver]

Originally Posted By: MolaKule
Do you have some university research or test results that show this trio to be better than what you find in off the shelf major PCMO's?


No, not at all, and I am NOT questioning anyone's knowledge, or expertise (including the formulating tribologists of said "major PCMOs").

Just curious about a TBN boosting, detergent pack type additive (plus boron instead of/inplace of the other 'regular suspect' AWs/FMs) to add to the middle-end of an OCI to replenish it until time to change out completely.
That's ALL.

 

[vo_marz]

Originally Posted By: dailydriver
Originally Posted By: vo_marz
After trying out 2011 tech level racing oils ...
additives goodbye~
Nothing beats a well formulated and up to date tech level oil by a BIG company.


M1R?? (Or something else?)


I only run cat pipes for emission tests.

so... you know... heh

 

[sprocketser]

So what s that oil vo_marz . Interesting to know .

 

[dailydriver]

Originally Posted By: sprocketser
So what s that oil vo_marz . Interesting to know .


Yes, I was asking if it was Mobil 1 Racing if you did not understand me.

 

[sprocketser]

Must ve been over it , lol thanx .

 

[sprocketser]

Yeah dailydriver , I guess vo_marz didn t answer or I never saw it .