Aftermarket Rim Center Bore and Offset Question

[UG_Passat]

I'm getting 17" rims and off-roading tires to swap from the stock 235/45R18 on a 2023 Hyundai Kona N-Line (on order, not in possession).

I'm concerned about the aftermarket rim's off-set (42 mm) and especially about the center bore of 72.62 mm. Would there be a problem fitting these onto my N-Line? I don't have the car; it's scheduled to be delivered to the dealership some time in January. There's a mad scramble for winter tires these days so I have to buy rims and tires blind. Bolt patterns on the aftermarkets are 5-100/114.3 so the bolts should be fine I believe.

I believe the OEM rims are an offset of 52 mm and a center bore of 67.1 mm. Bolt pattern is 5 x 114.3 (5 x 4.5).

Thanks all.

The width of the wheel combined with the offset helps dictate how it fits in the fender well plus tires

Get the width of both wheels and use www.willtheyfit.com to get an idea

Hub rings that go on the wheel will make up for the difference between center bores