5W30 Jeep 4.0

Status
Not open for further replies.
Joined
Jun 23, 2003
Messages
5
Location
SE Texas
SAE 5W30 in a '98 Wrangler TJ
6065 interval using a Jiffy Lube filter, no top-off oil througout interval.

Contamination
Silicon 11
Potassium 0.0
Sodium 4.9
Fuel (%) less than 2.0
Glycol (%) less than 0.02
Water (%) less than 0.1
Soot (%) 0
Sulfation ---
Nitration ---

Oil Condition
Boron 2.7
Barium 0.0
Calcium 1892
Magnesium 30
Molybdenum 104
Sodium 4.9
Phosphorus 820
Antimony 0.0
Zinc 928
Visc@40°C ---
Visc@100°C 10.2
Oxidation --- ---
TAN ---
TBN 3.62



WEAR
Iron 23
Nickel 1.0
Chromium 1.0
Titanium 0.2
Copper 5.9
Aluminum 4.6
Tin 0.0
Lead 12
Silver 0.0


Comments?
 
Your Lead looks high and would worry me. Your iron is somewhat high but not bad for a winter run of 6000 miles. TBN shows oil is about at max.
Maybe your lead is always high so a trend analysis would tell you more about it. Is this your first analysis of the oil in this engine?
Silicon shows good air filtration.
smile.gif
 
Status
Not open for further replies.
Back
Top Bottom