2008 FLHTCU, Amsoil MCV 20W50 4,896 miles

Status
Not open for further replies.
Joined
Aug 9, 2007
Messages
152
Location
Illinois
Miles on Oil: 1500/1496/4911/4948/4896
Time on oil: 9 days/15 days/26 days/1 month/2 months
Oil: HD 360/Amsoil MCV 20W50/MCV 20W50/MCV 20W50/MCV 20W50

Iron 8/4/5/7/6
Chromium 0/0/0/0/0
Lead 3/0/3/1/1
Copper 29/17/22/12/11
Tin 0/0/0/3/0
Aluminum 3/2/3/3/3
Nickel 0/0/0/0/0
Silver 0/0/0/0/0
Silicon 15/12/11/9/8
Boron 261/47/23/6/3
Sodium 4/0/0/3/2
Magnesium 743/178/135/33/15
Calcium 1285/2887/2771/3147/3064
Barium 0/0/0/0/0
Phosphorus 911/1142/821/896/851
Zinc 1047/1221/1122/1292/1169
Molybdenum 0/43/37/49/43
Titanium 0/0/0/0/0
Vanadium 0/0/0/0/0
Potassium 0/0/0/3/2
Fuel 1.7/ Visc100 18.96/21.20/21.81/23.6/21.9
Water 0/0/0/ Nitr n/a/15/18/16/15
Oxid n/a/20/24/33/27
TBN 8.80/8.52/7.70/7.79/7.31


Bike has 18,009 miles at UOA and oil was changed. OAI completed UOA.
Still using FP Plus and Bio Plus fuel additive 50/50. OEM oil and air filters.
Fuel dropped after spark plugs were replaced and air filter was cleaned. I was glad to see that.
OAI flagged visc. with a 1.
I think everything is fine with this engine.


Any comments or suggestions?
 
Every thing is VERY fine. I would add the Amsoil Eao oil filter next go around. There is some solid evidence that because of the flow of the filter....the engine never sees unfiltered oil because the bypass never kicks on!
 
That's the best used oil analysis I've seen the Amsoil bike oil turn in. It looks like they may have been tweaking the formula, from the additive pack number comparisons.

It's cold about everywhere these pages are read, and folks aren't checking out the motorcycle threads as much as they will in warmer weather. So hopefully this thread will revive in the spring for those wishing to use the Amsoil product in their Harleys.

You've got some good data there. You're even under the UA's for copper, which the group IV and V syns haven't typically been able to accomplish. Thanks for sharing...

I don't understand why Amsoil has left page 2 of the MSDS blank, however... http://www.amsoil.com/msds/mcv.pdf

That would be the page which would tell us the oil categories. One must wonder why Amsoil doesn't want us to see that. Could it be... hmmm... :)

...rated PC for "petroleum content."
wink.gif
whistle.gif


Dan
 
Originally Posted By: fuel tanker man
That's the best used oil analysis I've seen the Amsoil bike oil turn in. It looks like they may have been tweaking the formula, from the additive pack number comparisons.

It's cold about everywhere these pages are read, and folks aren't checking out the motorcycle threads as much as they will in warmer weather. So hopefully this thread will revive in the spring for those wishing to use the Amsoil product in their Harleys.

You've got some good data there. You're even under the UA's for copper, which the group IV and V syns haven't typically been able to accomplish. Thanks for sharing...

I don't understand why Amsoil has left page 2 of the MSDS blank, however... http://www.amsoil.com/msds/mcv.pdf

That would be the page which would tell us the oil categories. One must wonder why Amsoil doesn't want us to see that. Could it be... hmmm... :)

...rated PC for "petroleum content."
wink.gif
whistle.gif


Dan


I think the all the new changes to cam area may have a lot to do with the lower copper numbers.

I was suprised of the low posts in this thread. I have seen statements about not enough Harley data. I am just trying to help out with data and plus it's very interesting to see what is going on inside an engine.

Thanks, FTM
 
This thread will get plenty of attention in the future, I believe.

It's 12 degrees F outside here as I type this (Virginia).

So thinking of my motorcycle is sort of sad at the moment (because I can't get out and ride it right now without checking my brain at the door). :D

Dan
 
Originally Posted By: fuel tanker man
This thread will get plenty of attention in the future, I believe.

It's 12 degrees F outside here as I type this (Virginia).

So thinking of my motorcycle is sort of sad at the moment (because I can't get out and ride it right now without checking my brain at the door). :D

Dan


Ya, it's always a long winter for me too. It was 9 degrees when I got up it is now 19.
 
Originally Posted By: sunruh
interesting that you had 1.7% fuel and a 23.6cst. that would be what? 70wt!


There were several numbers that were odd with that sample. That was the first sample that was sent to the new OAI, which I believe is Polaris. Everything seemed to straighten out in the last sample though.
 
Status
Not open for further replies.
Back
Top Bottom