Search results

Anyone know what the advantages or disadvantages are of using noxudol 750 Vs 700? The 750 apparently uses solvents

Incase anyone needs to know the 50L 3hp compressor I used had no issues doing the spraying it didn't even cycle much so I suspect a smaller compressor would also work for spraying cavity wax

Finally got round to spraying the noxudol one the car. Oddly it's still a liquid form on the car and not dried after 3 days. From reading up it's gonna take longer than 5 days and seems to be creeping all over the place. Time will tell how it turns out to be. Hopefully car won't dissolve now

Is this ok to spray in top of the rocker panels and not just inside?

Yes the bits that have the bubbling paint I will go over with a wire wheel and strip disc to bare metal then paint it before applying wax coat

here is a video iv uploaded of one side, other side is in similar condition. wax coating the way to go then? same stuff like cavity wax? will noxudol 700 work fine?

So had the chance last weekend to remove the side skirts on the Celica and was relieved to see them in decent condition with no need for welding. Question is what do I do now to preserve them? I wiped them down and got the mud out of the plastic trim covers but not sure if I should just leave as...

Japanese cars I go with Nachi bearings or koyo. European cars I go with FAG, INA or skf

https://silverhook.co.uk/Clear-Wax-Coating-1-Litre-Schutz-rust-proofing That's the stuff I used. Got more used to the sprayer now. Noticed that the trigger travel needs to be reduced for it to mist up properly otherwise too much wax comes out

Hmm, would it have anything to do with adjusting the ratio of air to product?

Does anyone else use this wax sprayer and has any tips on how to use it such as the pressure to use and what that screw does under the trigger? Photo attached of what it looks like, goes under different brand names too

As above looks like it was tightened up more rather than loosend

What I don't get is that these wax guns like the sealey sg18 don't come with any sort of operating instructions so not sure how to use it properly without some trial and error

Anyone used a dowty washer?

Cost is a major factor for me, the wax in the video in my earlier post is silverhook clear cavity wax and costs £7 for a 1L bottle which is fairly cheap. And got a good offer on the noxudol bottles too I think we're £9 each. Also wax will not wash off easily , got some on my glasses and it was a...

Here is a video i made of how its working now

Looks like iv got this sorted out. Pressure makes no difference. The wax needs to just be thinner. Heat seems to be working. This old kettle thats not been used for 2 years finally came in handy

Finally got round to doing the waxing today. Ran into an issue, the cavity wax probe doesn't work. The 90 degree lance works fine and gun sprays fine without any attachments but I tried different pressure settings too and still didn't get the cavity probe to work it just pushes out air and no...

Ahh so the half inch is better even though it is longer.

Is a 10m long 3/8 air hose better than a 15m long 1/2 inch air hose? Does the extra length negate the advantages of the 1/2 diameter hose?