Search results

Live where winters are cold? Try shifting a box full of 90wt.

Any way of spacing the hood up ?

Weld a drain plug into pan while its off. After that makes it easy to do a quick drain every other oil change or so.5 1/2 to 6 qts will drain if you let it sit awhile. Have often refilled with different brands of Dex 6 with no problems.On my 2017 rwd Silverado I had to drop the Y pipe to remove...

When you rebuilt the carb did you change the gasket between the throttle plate and main body? There are several different ones and possibly the idle ports or transfer slot holes could have been blocked off.

Best UV protection is a cover anytime bike is parked. I have always just used simple stuff like Mothers or Meguirs on bikes or vehicles with good results.

Yes there are small engine valve spring removal tools. Almost look like a pair of tongs for kitchen use but have a thumb screw at end of handle to close them up. Put one jaw over the retainer and jam the other into lower part of the spring tighten the screw to compress the spring and just...

Its still only 8 hp with the heavy snow sort of like bringing a knife to a gunfight.

Probly good to go. Your on grass anyway with a light machine if you notice any scuffing in a tight turn you can play with the toe then.

Older Ford heavy trucks had left hand thread lugs on left side but often had an L stamped on the end of the stud

23 degrees this morning south of Daytona Beach.

Imported equipment tires almost always run smaller than the OEM tires on anything. Guess its not illegal to put a size on a tire that it is obviously not. It should be considered false advertising but in todays world any crap China feeds us we eat.

Wish NASCAR would get rid of all of the gimmick stuff and just bring the Clash back to Daytona where it was successful for so many years.

Sounds fine only thing you are really breaking in are the fings anyway.

1993 XL1200 Sportster 2001 FXDWG...

Working in a country garage in SE Mass . Sold Mobil gas a Cadillac pulled up to the pumps and the woman driving it was in tears, Told me Elvis had passed away,

If you have a 240V outlet for a dryer or even a welder in the garage Northern Tool or even Home Depot have some heaters that can be run off a proper cord. Not real expensive to buy either.

May be some bushings or adaptors available . Research some places like Jacks Small Engines or other online vendors before attempting to much welding. Think the impeller is fairly heavy and don't want to get things out of balance.Predator 212 has at least as much power as the Briggs and is easily...

Have made two day trips and kept stuff frozen in an igloo cooler by using solid blocks of ice and wrapping the cooler with couple of old blankets or even beach towels. Used a separate smaller cooler for water or other beverages for the trip.

200k past the waranty? Your engine is probably broken in well enough its not really createing any small wear particles anyway. Use them.

I use Castrol Edge 10/30 in my2017 5.3 Silverado but I am in FL and tow with it