Recent content by ZoomZ

I just verified the Transmission side is worn and looks like it's sagging. This is another easy one to change, so it has been ordered. Not too expensive but not much to it. OEM.

2 of them are really easy to change. Other not so much. I'll have to revisit.

I dont think it does, I have heard of it on other vehicles, but I will check. great idea thanks.

HI. 2013 Nissan Murano AWD. 276,000 Km's. When i drive around 15-20 KPH, in Drive (D) and i release the gas pedal, touch nothing else, I hear a growl or vibration on the deceleration, Sound goes away after a second as i slow down or if i accelerate. There is a noise that I can hear while...

Works as described. The only downside is, that maybe it doesn't hold right away. If there isn't enough torque on the spark plug, it may not "retain" by tension. I had to really try and make it do this, so still worked. Of course there is the psychological effect of knowing there is nothing...

I have the Motive power filler, even better. The issue was not how to get it in, but the restriction at the filler. You can use whatever you want to pump it in, you just need a long, thin hose or pipe...

Ya BS. Always run finger on threads anyway. If I get cut, i need to look further. ;) All my cars have horizontal mounted oil filter. I fill them to top, and let the media absorb it. Oil never comes out.

Figured it out. This model year Accent has both a fill and drain, easily accessible on hoist or even on jack stands. Both plugs are 17 mm hex head and have thin aluminum washer gasket. (probably same part number even though Hyundai does not list the fill plug P/N) The fill port seems to be...

Hi Folks. Having a hard time determining where the fill plug is for this year and model. I see some videos showing a standard drain and fill and others showing only drain but filling through reverse light switch port on top. Parts stores indicate only drain plug gasket. Hyundai parts also...

Its a Japanese lacquer and the process that is expensive.

https://www.urushipen.com/collections/full-collection

I like quality tools. I Like the look and feel of quality construction, weight of the steel and proper chrome. Kind of like women with their shoes. ;) Life is short, enjoy what you can afford. ;)

I went with the Snap-on retention socket. Neither magnetic, rubber or clip. Interesting technology, we'll see how well it works. https://shop.snapon.com/product/Retention/3-8"-Drive-6-Point-Metric-14-mm-Flank-Drive-Retention-Spark-Plug-Socket/S9714MKR I did not pay $96 cdn. I have a 25%...

I assume that was the #1 aircraft that just landed? I was wondering where and what happened to that one since Jazz was #2 to land

Absolutely. I believe the RJ requires below 60 kts for idle reverse and max reverse not below 75kts. They were still moving fast.