wtd's latest activity

  • W
    wtd replied to the thread Chevy cobalt battery drain.
    I'm saying that you have to put your multimeter in series with one of your battery cables to measure what your amp draw is. For...
  • W
    wtd replied to the thread Chevy cobalt battery drain.
    You have a parasitic draw. Have you used an ammeter inline to one of your battery cables to see how much draw you have and have you...
  • W
    wtd replied to the thread AC Condenser Fin Cleaner.
    I just always hook it to a garden hose from an outside faucet so I'm not sure about the water pressure. I have used it successfully for...
  • W
    wtd replied to the thread Fuel/Emissions Hose or Transmission Hose For Catch Can?.
    I would use emission hose or something rated to handle oil so that it doesn't soften the hose and cause it to collapse under vacuum.
  • W
    wtd reacted to D60's post in the thread What are you working on today? with Like Like.
    Basket case '05 Ram 1500 now with 299,318 miles: -oil change -swapped the headlight switch for one that's fog-capable and the fogs in...
  • W
    wtd replied to the thread Opinion wanted on this torque wrench.
    I used a click style torque wrench recently to torque the transmission pan bolts up on a 97 GMC truck. Worked great. I also have...
  • W
    wtd replied to the thread What are you working on today?.
    Yesterday I replaced the Duralast Gold alternator on my 92 Cavalier. It had started making some noise last year but Autozone wouldn't...
  • W
    wtd replied to the thread AC Condenser Fin Cleaner.
    I use the Radiator Genie water sprayer for my radiator and condenser. It works very well. I also use the air nozzle on them sometimes...
  • W
    wtd replied to the thread My oil level is going up??? Really need help.
    Well, only two things could really cause the increase in the oil level and that is coolant or fuel. Does your coolant level stay the...
  • W
    wtd replied to the thread What are you working on today?.
    Recharged the AC in my 92 Cavalier. Last year when I went to use it, it had quit working from the year before and I didn't mess with...
  • W
    wtd reacted to AutoMechanic's post in the thread Capri and Icon beat Snap on with Like Like.
    Not to take it off topic but I’ve had really good luck with the Astro Pneumatic swivel impact sockets. I’ve only broken one and it was...
  • W
    wtd replied to the thread Brake lines for a old truck?.
    I made all new rear lines that went from one rear wheel to the other rear wheel years ago for a 96 F-150. I bought the line and used a...
  • W
    wtd reacted to JHZR2's post in the thread Brake lines for a old truck? with Like Like.
    Just make some. I just did it. SS armor, nicopp line from FedHill, line nuts and unions from same. I like the Capri flare tool, and a...
  • W
    wtd replied to the thread Long Term Fuel Trim at 20% 04 Mazda 3 2.3L.
    Have you looked at fuel trims at higher rpms? Take it up to 3,500 rpms or so and look at your fuel trims. Typically, if they get...
  • W
    wtd reacted to iCurious's post in the thread Long Term Fuel Trim at 20% 04 Mazda 3 2.3L with Like Like.
    Lean condition under load only - I would be looking at a dirty or defective MAF sensor. Sometimes cleaning the MAF sensor works and...
Show older items
Back
Top Bottom